Skip to content Skip to navigation menu

Creating a Silica Dust Exposure Control Plan

Silica dust poses health and safety and compliance challenges in many work environments. Controlling the extremely fine dust is a complex task requiring both proper engineering controls and effective housekeeping practices. Tennant tools and technologies can play an important role in helping you manage the silica dust challenge, and can support silica exposure control plans that help you create safe, healthy, productive work environments.

  • OSHA has reduced the permissible exposure limit of respirable crystalline silica dust, requiring employers to use engineering and housekeeping controls to limit worker exposure when feasible.
  • Respirable crytalline silica dust is at least 100 times smaller than sand. This poses a major health concern according to over 50 peer reviewed studies.
  • OSHA estimates that over 2 million workers are exposed to respirable crystalline silica dust.

Additional Resources

For additional information on OSHA's ruling to Protect Workers from Exposure to Respirable Crystalline Silica and compliance schedule, visit the OSHA website.

For additional information on the silica dust ruling and compliance schedule, visit



If you have any questions about our products or services, or would like to speak to a Tennant expert, please send us a message, or for immediate assistance, 


  • +65 9023 0231 (Singapore, Malaysia, Taiwan, South Korea, Bangladesh, Sri Lanka, Pakistan, Guam)
  • +66 8 9890 4672 (Thailand, Indonesia, Vietnam, The Philippines, Myanmar, Cambodia, Laos)

Brands marked with ® are registered in the United States and/or other countries. Brands marked with the TM are not registered and protected under applicable law.